Electromagnetic Hammer model EH25
Chamber Plate Thickness more than 2 mm & Maximum 3mm.
Rated Voltage
200 V AC, 50 Hz
Operating Voltage Range
220 V
Rated Pulse Current
1 Amp
Power Consumption @ 10 Strokes/min
-
Impact Force
30 Kg (min)
Weight
8 Kg
Electromagnetic Hammer
Electromagnetic Hammer model EH50
Chamber Plate Thickness more than 3 mm & Maximum 4mm.
Rated Voltage
400 V AC, 50 Hz
Operating Voltage Range
380 V – 460 V
Rated Pulse Current
4.2 Amp
Power Consumption @ 10 Strokes/min
0.003 Units/Hr
Impact Force
70 Kg (min)
Weight
20 Kg
Electromagnetic Hammer model 75mm
Chamber Plate Thickness more than 5 mm & Maximum 8mm.
Rated Voltage
400 V AC, 50 Hz
Operating Voltage Range
380 V – 460 V
Rated Pulse Current
6 Amp
Power Consumption @ 10 Strokes/min
0.045 Units/Hr.
Impact Force
125 Kg (min)
Weight
25 Kg
Operating Features
Electromagnetic Hammer consists of a stator and rotor, with are made out of high grade strip lamination to minimize iron losses. The part movement of the rotor shaft directly transmitted to hammer stoker Electronic controller controls the excitation of hammer coil.
Base Mounting
Base plate is essential to prevent dent-crack formation of the chamber wall due to continuous hammering. During installation please ensure that the distance beetween chamber surface and base plate should be 75 mm (at top) & 65 mm (at bottom) to obtain maximum efficiency.
Salient Features
Ours maintenance of electromagnetic hammer is zero where as others is very costly.Installation cost of our Electromagnetic hammer is very low compared to other hammering system.In operating system no man power required.Our Electromagnetic Hammer can be serviced without any prior maintenance even after long shutdown.Our Electromagnetic hammer consumes less electric power i.e. it monthly electric Bill.
Spares
-
Rubber clamp with pair
-
Leaf Spring
-
Spiral Spring
-
Sticking Handle
-
Magnetic Coil
